Wave Instruments LLP

• _{Size 48(w)x48(h)x85 (d)mm (Model :- WTC-2301-BOD-PR)}
• _{Size 72(w)x72(h)x110(d)mm (Model :- WTC-2101-BOD-PR)}
• _{Size 96(w)x48(h)x110(d)mm (Model :- WTC-2001-BOD-PR)}
• _{Size 96(w)x96(h)x85 (d)mm (Model :- WTC-2201-BOD-PR)}

Four-digit dual displayOutput: 1. Heating Relay Contact or SSR, 2. Cooling Relay contact or SSR, 3.Alarm Relay contact or BuzzerPID –Autotune or On/Off Control selectionControl action: Heating control-PID (Autotune) and Cooling control -On/OffA single program, Nine step, Soaking time & Ramp settingRamp selection: Time base or Temperature base (Temperature /Minute)Time base ramp: Time setting 0 to 1000 Minute (0=Natural rise)Temperature base ramp: Temperature/Minute setting 0.0 to 100.0°c (0.0=Natural Rise)Overnight delay timer( OptionalPower down memory for delay time, Step number & soaking timeAuto-tuning require for pb, It & dt valueSoak band to enable soaking timer in this bandControl temperature, Soak time & ramp value with step number indication by INC. KeyCooling Hysteresis 0.2 to 25.0°c adjustableDelay 0 to 250 second adjustable for cooling controlOPEn display if Sensor break and Relay trip if sensor breaks or connection openCalibration Error correction by a front key switch (No preset setting)Configure link @ Back terminal to avoid unauthentic entry.Defrost On & Off settingAlarm output optionalAlarm Mute by decrement key.Manual defrost on by increment key (press for 5 seconds)RS485 Output Optional

Microcontroller based

Four-digit dual display

Output: 1. Heating Relay Contact or SSR, 2. Cooling Relay contact or SSR, 3.Alarm Relay contact or Buzzer

Control action: Heating control-PID (Auto tune) and Cooling control -On/Off

Heating and Cooling control

Range: -99.0 to 400.0

Heating & cooling Temperature As per range adjustable in set mode

Alarm setting -25.0 to 25.0 adjustable above and below set value

Ct 1 to 60 second for SSR output & 10 to 120 second for Relay output adjustable

Auto tuning require for pb, It & dt value

Cooling Hysteresis 0.2 to 25.0 adjustable

Delay 0 to 250 second adjustable for cooling control

Open display if Sensor break

Relay trip if sensor breaks or connection open

Calibration Error correction by front key switch (No preset setting)

Configure link at Back terminal to avoid unauthentic entry.

Defrost On & Off setting

Alarm output optional

Alarm Mute by decrement key

Manual defrost on by increment key (press for 5 seconds)

RS485 Output Optional